博客
关于我
redhat6.9安装oracle11.2.0.4 PRCF-2010
阅读量:443 次
发布时间:2019-03-06

本文共 3952 字,大约阅读时间需要 13 分钟。

redhat6.9安装oracle11.2.0.4 执行root.sh脚本,发现scp文件至节点2无法传输报错

INFO: /tmp/OraInstall2020-05-04_11-56-08PM/mvstubs.shINFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.INFO: Copying Oracle home '/u01/app/11.2.0/grid' to remote nodes 'wsgw2'.WARNING: Error while copying directory /u01/app/11.2.0/grid with exclude file list '/tmp/OraInstall2020-05-04_11-56-08PM/installExcludeFile.lst'  to nodes 'wsgw2'. [PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one remote node to send the installer files!PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer. There has to be at least one  remote node to send the installer files!]Refer to '/u01/app/oraInventory/logs/installActions2020-05-04_11-56-08PM.log' for details. You may fix the errors on the  required remote nodes. Refer to the install guide for error recovery. Click 'Yes' if you want to proceed. Click 'No'  to exit the install. Do you want to continue?

查询MOS

Linux: GI installation fails as bindv6only is set to 1: "PRCF-2010 : All connections to the remote nodes got refused. Cannot proceed with the file transfer" (Doc ID 1999296.1)    The firewall is disabled and hence not the cause of the connections being refused虽然版本不太匹配,MOS是12.1 但是其中有关于ip6tables!!!root@node1:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node1:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running.root@node2:~$ /etc/init.d/iptables statusiptables: Firewall is not running.root@node2:~$ /etc/init.d/ip6tables statusip6tables: Firewall is not running. SOLUTIONThe issue is caused by the kernel parameter net.ipv6.bindv6only being set to 1 as seen belowgrid@node1:~> sysctl net.ipv6.bindv6onlynet.ipv6.bindv6only = 1grid@node1:~>The solution is to set net.ipv6.bindv6only to 0 and install the Grid Infrastructure softwarenode1:~ # sysctl net.ipv6.bindv6only=0net.ipv6.bindv6only = 0node1:~ #

实际环境检测

系统安装redhat6.9 防火墙已关闭,但是对于ipv6的服务并未关闭!!! 因此是这个问题导致的,关闭ipv6服务后,ok  两个节点都要操作 [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/iptables statusiptables: Firewall is not running.[root@wsgw1 CVU_11.2.0.4.0_grid]# sysctl net.ipv6.bindv6only net.ipv6.bindv6only = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]# [root@wsgw1 CVU_11.2.0.4.0_grid]#  sysctl -a|grep -i 'ipv6'|grep 'disable'net.ipv6.conf.all.disable_ipv6 = 0net.ipv6.conf.default.disable_ipv6 = 0net.ipv6.conf.eth0.disable_ipv6 = 0net.ipv6.conf.eth1.disable_ipv6 = 0net.ipv6.conf.lo.disable_ipv6 = 0[root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables statusTable: filterChain INPUT (policy ACCEPT)num  target     prot opt source               destination         1    ACCEPT     all      ::/0                 ::/0                state RELATED,ESTABLISHED 2    ACCEPT     icmpv6    ::/0                 ::/0                3    ACCEPT     all      ::/0                 ::/0                4    ACCEPT     udp      ::/0                 fe80::/64           state NEW udp dpt:546 5    ACCEPT     tcp      ::/0                 ::/0                state NEW tcp dpt:22 6    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain FORWARD (policy ACCEPT)num  target     prot opt source               destination         1    REJECT     all      ::/0                 ::/0                reject-with icmp6-adm-prohibited Chain OUTPUT (policy ACCEPT)num  target     prot opt source               destination         [root@wsgw1 CVU_11.2.0.4.0_grid]# /etc/init.d/ip6tables stopip6tables: Setting chains to policy ACCEPT: filter         [  OK  ]ip6tables: Flushing firewall rules:                        [  OK  ]ip6tables: Unloading modules:                              [  OK  ][root@wsgw1 CVU_11.2.0.4.0_grid]# chkconfig --level 35 iptables off [root@wsgw2 CVU_11.2.0.4.0_grid]#  /etc/init.d/ip6tables statusip6tables: Firewall is not running.

 

转载地址:http://dtlyz.baihongyu.com/

你可能感兴趣的文章
MySQL中DQL语言的执行顺序
查看>>
mysql中floor函数的作用是什么?
查看>>
MySQL中group by 与 order by 一起使用排序问题
查看>>
mysql中having的用法
查看>>
MySQL中interactive_timeout和wait_timeout的区别
查看>>
mysql中int、bigint、smallint 和 tinyint的区别、char和varchar的区别详细介绍
查看>>
mysql中json_extract的使用方法
查看>>
mysql中json_extract的使用方法
查看>>
mysql中kill掉所有锁表的进程
查看>>
mysql中like % %模糊查询
查看>>
MySql中mvcc学习记录
查看>>
mysql中null和空字符串的区别与问题!
查看>>
MySQL中ON DUPLICATE KEY UPDATE的介绍与使用、批量更新、存在即更新不存在则插入
查看>>
MYSQL中TINYINT的取值范围
查看>>
MySQL中UPDATE语句的神奇技巧,让你操作数据库如虎添翼!
查看>>
Mysql中varchar类型数字排序不对踩坑记录
查看>>
MySQL中一条SQL语句到底是如何执行的呢?
查看>>
MySQL中你必须知道的10件事,1.5万字!
查看>>
MySQL中使用IN()查询到底走不走索引?
查看>>
Mysql中使用存储过程插入decimal和时间数据递增的模拟数据
查看>>